light touc h switches/EVQPL design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. ? es80 ? e v q p l product code type height 123456 89 a 7 note: non wash able speci? cations 4.9 mm square smd light touch switch es type: EVQPL features external dimensions : 4.9 mm 4.9 mm, height: 0.8 mm(without push plate), 1.5 mm(with push plate) explanation of part numbers product chart height h=0.8 mm h=1.5 mm (with push plate) packaging operatin g force embossed embossed 1.0 n EVQPL bEVQPLd 1.6 n EVQPL fEVQPLh 2.6 n EVQPLk EVQPLm type sn ap action/push- on type spst electrical rating 10 a 2 vdc to 20 ma 15 vdc (resi stive load) contact re sistance 50 m max. insulation resistance 50 m min. (at 100 vdc) dielectric with stand ing voltage 250 vac fo r 1 minute bouncing 3 ms max. (on) 8 ms max. (off) mechanical operatin g force 1.0 n 0.5 n 1.6 n 0.5 n 2.6 n 0.6 n travel 0.25 mm +0.10 mm en du ra nc eo pe ra ti ng li fe 5 00000 cycles min. 200000 cycles min. operating temp erature ?20 c to +70 c storage tem per a ture ?40 c to +85 c (bulk) ?20 c to +60 c (taping) minimum quantity/packing un it 5000 pcs. embossed taping (reel pack) quantity/carton 25000 pcs. ?0.20 recommended applications operation switches for portable electronic equipment (notebook pc, camcorders, portable audio players, etc.) operation switches for car audio systems sep. 2010 00
light touc h switches/EVQPL design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. ? es81 ? 4.9 4.6 1.2 4.6 4.9 3.7 b' a' b a 0.2 0.3 2.5 0.4 0.8 0.05 0.45 5.0 0.5 3.2 3.1 4.3 (4.6) (5.5) a b a? b? (1) 3.4 5.4 gnd operating part be careful not to scratch the film pwb land pattern for reference circuit diagram 4.9 4.6 1.2 2.4 4.6 4.9 2.2 (3.4) (3.8) 4 4.4 3.7 3.1 4.3 (4.6) (5.5) a b a? b? (1) 3.4 5.4 b? a? b a 0.2 0.3 2.5 0.4 0.8 1.2 0.05 0.45 5 0.5 gnd 1.5 0.2 0.1 + ? operating part pwb land pattern for reference circuit diagram dimensions in mm (not to scale) EVQPLb EVQPLf EVQPLk (embossed taping) surface mount for re? ow soldering without pu sh plate EVQPLd EVQPLh EVQPLm (embossed taping) surface mount for re? ow soldering with push plate no. 1 part numb ers operating force height operating life ev qp lb a0 81 .0 n0 .8 mm 5 00000 cycles ev qp lf a0 81 .6 n0 .8 mm 50 0000 cycles ev qp lk a0 82 .6 n0 .8 mm 20 0000 cycles part numb ers operating force height operating life ev qp ld a1 51 .0 n1 .5 mm 5 00000 cycles ev qp lh a1 51 .6 n1 .5 mm 5 00000 cycles ev qp lm a1 52 .6 n1 .5 mm 2 00000 cycles no. 2 sep. 2010 00
light touc h switches/EVQPL design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. ? es82 ? p 2 p 0 p 1 t 2 t 1 d 0 a b feeding hole chip component tape running direction chip pocket f w e tape width=12.0 mm t w a b e c d r t 1.0 r0.2 0.05 for reflow soldering type 0.3 mm max. switch mounting surface test pole leaning angle range 90 4 ( vertical direction ) 180 260 max. 150 230 90 30 40 10 (normal temp.) operation top ( c) soldering time (s) fan or normal temp. standard reel dimensions in mm (not to scale) recommended operating conditions recommended shape of test pole recommended re? ow soldering conditions embossed carrier tap ing unit: mm part no. height abwfep 1 p 2 p 0 d 0 dia. t 1 t 2 EVQPL 0.8/1.5 5.00.2 5.00.2 12.00.3 5.50.1 1.750.10 8.00.1 2.00.1 4.00.1 1.5 +0.1 0.350.05 1.0/1.70.2 ?0 item a b c d e rate (mm) 370.02.0 5 0.0 min. 13.00.5 21.01 .0 2.00.5 item w t t r rate (mm) 14.01.5 ? 1 .0 to 3.0 1.00.5 sep. 2010 00
|
